SEAT_DEPTH_POS
What it is
Seat depth position
Sets the seat depth, distance from back rest to front edge of seat.
The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.
The minInt32Value indicates the seat is in its shallowest position (i.e. the position with the smallest distance between the front edge of the seat cushion and the rear end of the seat). The maxInt32Value indicates the seat is in its deepest position (i.e. the position with the largest distance between the front edge of the seat cushion and the rear end of the seat).
Values in between minInt32Value and maxInt32Value indicate a transition state between the shallowest and deepest positions.
This property is not in any particular unit but in a specified range of relative positions.
This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.
How the ID is built
A property ID is a 32-bit value packing four fields. Reading 0x15400b8d apart:
| Field | Mask | Value | Means |
|---|---|---|---|
| Group | 0xf0000000 | 0x10000000 | SYSTEM |
| Area | 0x0f000000 | 0x05000000 | SEAT |
| Type | 0x00ff0000 | 0x00400000 | INT32 |
| Ordinal | 0x0000ffff | 0x00000b8d | 0xb8d |
Reading it from an app
CarPropertyManager mgr = (CarPropertyManager)
car.getCarManager(Car.PROPERTY_SERVICE);
int value =
mgr.getIntProperty(VehiclePropertyIds.SEAT_DEPTH_POS, areaId);This property can be read and written, though an OEM may implement it as read-only. It fires a callback whenever the value changes.