GLOVE_BOX_DOOR_POS
What it is
Property that represents the current position of the glove box door.
The maxInt32Value and minInt32Value in VehicleAreaConfig must be defined. All integers between minInt32Value and maxInt32Value must be supported.
The minInt32Value indicates that the glove box door is closed. The minInt32Value must be 0. The maxInt32Value indicates that the glove box door is in the fully open position.
Values in between minInt32Value and maxInt32Value indicate a transition state between the closed and fully open positions.
This property is not in any particular unit but in a specified range of relative positions.
The area ID must match the seat by which the glove box is intended to be used (e.g. if the front right dashboard has a glove box embedded in it, then the area ID should be SEAT_1_RIGHT).
This property is defined as VehiclePropertyAccess.READ_WRITE, but OEMs have the option to implement it as VehiclePropertyAccess.READ only.
How the ID is built
A property ID is a 32-bit value packing four fields. Reading 0x15400bf0 apart:
| Field | Mask | Value | Means |
|---|---|---|---|
| Group | 0xf0000000 | 0x10000000 | SYSTEM |
| Area | 0x0f000000 | 0x05000000 | SEAT |
| Type | 0x00ff0000 | 0x00400000 | INT32 |
| Ordinal | 0x0000ffff | 0x00000bf0 | 0xbf0 |
Reading it from an app
CarPropertyManager mgr = (CarPropertyManager)
car.getCarManager(Car.PROPERTY_SERVICE);
int value =
mgr.getIntProperty(VehiclePropertyIds.GLOVE_BOX_DOOR_POS, areaId);This property can be read and written, though an OEM may implement it as read-only. It fires a callback whenever the value changes.